The Effect of Opening in Oriented Corrugated Web Steel Beams
##plugins.themes.bootstrap3.article.main##
##article.abstract##
The use of corrugated webs in steel beams has been found to increase their efficiency in resisting loads and natural frequencies. This practice has the same efficiency as flat webs with greater thickness. A study analyzing 23 beams with flat and corrugated webs using finite element numerical analysis showed that the three types of corrugated webs (trapezoidal, rectangular, and triangular) had different effects on flexure mode shapes and natural frequencies. The results showed that FE numerical analysis accurately predicted natural frequencies and flexure mode shape changes in beams with corrugated webs, resulting in a 33% reduction in thickness compared to flat beams. The triangular type was more efficient in the first mode shape, while rectangular was better for other modes. The angle for the triangular type was found to be effective in resisting mode shape and frequencies, with decreases of 0.60 and 0.78, respectively. The effect of thickness and angle was perceived to be linear for specific cases. This paper receives a light on two intentions: the first one is the flexure behavior of corrugated web beams subjected to uniform or point load, while the second one is the effect of web openings on the load capacity of steel beams with corrugated webs. Trapezoidal corrugated steel webs in the cross-sectional plane (i.e. horizontal) and oriented in in-plan direction were investigated arithmetically by the use of a Finite Element (FE) technique. In the finite element analysis, 3D models were studied using ANSYS software and a non-linear analysis was performed through thirty models of simply supported beams. Results show that using corrugated web does not have significant effect on the beam resistance to bending but increases the beam resistance to shear.
##plugins.themes.bootstrap3.article.details##
##submission.howToCite##
##submission.citations##
De'nan, F., & Hashim, N. S. (2011, July). The effect of web corrugation angle on bending performance of triangular web profile steel beam section. In 2011 International Conference on Multimedia Technology (pp. 6588-6591). IEEE. DOI:10.1109/ICMT.2011.6002802.
Elgaaly, M., Hamilton, R. W., & Seshadri, A. (1996). Shear strength of beams with corrugated webs. Journal of Structural Engineering, 122(4), 390-398. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(390)
European committee for standardization. Eurocode 3. Design of steel structure; (2012).
Hutton, D. V. (2004). Fundamentals of finite element analysis. McGraw-hill.
Jamali, S. (2004). Lateral torsional buckling of trapezoid web profile (Doctoral dissertation, MSc. Thesis, Universiti Teknologi Malaysia).
Johansson, B., Maquoi, R., Sedlacek, G., Müller, C., & Beg, D. (2007). Commentary and worked examples to EN 1993-1-5 Plated Structural Elements. JRC scientific and technical reports.
Korrani, H. R. K. N., & Molanaei, S. (2010). The effects of the corrugation profiles of the web on the lateral-torsional buckling strength of the inelastic I-girder. World Applied Sciences Journal, 8(5), 527-530.
Khalid, Y. A., Chan, C. L., Sahari, B. B., & Hamouda, A. M. S. (2004). Bending behaviour of corrugated web beams. Journal of materials processing technology, 150(3), 242-254. DOI: 10.1016/j.jmatprotec.2004.02.042
Kudryavtsev, S. (2018, June). Influence of web openings on bearing capacity of triangularly corrugated web beam. In IOP Conference Series: Materials Science and Engineering (Vol. 365, No. 4, p. 042034). IOP Publishing. DOI:10.1088/1757-899X/365/4/042034
Li, X., Zhang, Z., & Li, G. (2019). Local bearing capacity of steel beams with corrugated webs. International Journal of Steel Structures, 19, 44-57.
Lin, X., Far, H., & Saleh, A. (2019). Structural behaviour and mechanical properties of welded steel I-girders with corrugated webs. International Journal of Steel Structures, 19, 1342-1352.
Manual, U. D. F. "ANSYS 18.0." Theory Guide (2017).
Morkhade, S. G., Baswaraj, S. M., & Nayak, C. B. (2019). Comparative study of effect of web openings on the strength capacities of steel beam with trapezoidally corrugated web. Asian Journal of Civil Engineering, 20(8), 1089-1099. https://doi.org/10.1007/s42107-019-00166-6
Riahi, F., Behravesh, A., Fard, M. Y., & Armaghani, A. (2018). Shear buckling analysis of steel flat and corrugated web I-girders. KSCE Journal of Civil Engineering, 22(12), 5058-5073.
Sayed, A. M. (2022). Numerical study of the effects of web openings on the load capacity of steel beams with corrugated webs. Journal of Constructional Steel Research, 196, 107418.
Zhang, W., Li, Y., Zhou, Q., Qi, X., & Widera, G. E. O. (2000). Optimization of the structure of an H-beam with either a flat or a corrugated web: Part 3. Development and research on H-beams with wholly corrugated webs. Journal of Materials Processing Technology, 101(1-3), 119-123. DOI:10.1016/S0924-0136(00)00450-7
Zhong, W. H., Tan, Z., Meng, B., Chou, Y. Z., Zheng, Y. H., & Duan, S. C. (2023). Numerical investigation of collapse behavior of steel–concrete composite frames containing corrugated webs with and without openings. Journal of Building Engineering, 66, 105889. https://doi.org/10.1016/j.jobe.2023.105889
Zubkov, V., Lukin, A., & Alpatov, V. (2018). Experimental research of beams with corrugated web. In MATEC Web of Conferences (Vol. 196, p. 01005). EDP Sciences. https://doi.org/10.1051/matecconf/201819601005
Ahmed M. Sayed (2022). Numerical study of the effects of web openings on the load capacity of steel beams with corrugated webs. In ElSevier Journal of Constructional Steel Research 196 (2022) 107418.
Ahmed Sedky Tohamy, Rabiee Ali Sadeek, Amr B. Saddek, Sherif Farouk Badran, Ahmed A. EL-Serwi (2022). Behavior of Trapezoidal Corrugated Webs Girders with Cutouts: Experimental and Analytical Solution. Journal of Engineering Sciences Faculty of Engineering Assiut University. JES, Vol. 50, No. 3, May 2022. DOI:10.21608/JESAUN.2022.121021.1115.
Omnia Fawzy Kharoob, Ahmed Mahmoud.El Hadidy, and Rania Mohamed Kassem (2019). Elastic Behavior of Corrugated Web Girders with Square Opening. Engineering Research Journal (ERJ).