The Impact of Oriented Corrugated Web Steel Beams Under Various Loads
Main Article Content
Abstract
I-section steel beams are highly used in steel structures, and the point of corrugated beams was had become known recently. In this research, various orientation assemblies of corrugated web steel beams were investigated in order to study the effect of web corrugation on flexure and shear behavior. Ten models of simply supported beams and another eight of cantilever beams were studied by using ANSYS software under concentrated and uniform load. The webs were corrugated and oriented in trapezoidal shape in the direction of web cross-sectional plane. Non-linear finite element analysis was studied, and the results show that the corrugated steel webs in I-section steel beams have a low effect on beam flexural resistance and they can enhance beam shear resistance.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
How to Cite
References
De'nan, F., & Hashim, N. S. (2011, July). The effect of web corrugation angle on bending performance of triangular web profile steel beam section. In 2011 International Conference on Multimedia Technology (pp. 6588-6591). IEEE. DOI:10.1109/ICMT.2011.6002802.
Beg, D., Kuhlmann, U., Davaine, L., & Braun, B. (2012). Design of plated structures: Eurocode 3: Design of steel structures, part 1-5: Design of plated structures. John Wiley & Sons.
De'nan, F., & Hashim, N. S. (2011, July). The effect of web corrugation angle on bending performance of triangular web profile steel beam section. In 2011 International Conference on Multimedia Technology (pp. 6588-6591). IEEE. DOI:10.1109/ICMT.2011.6002802.
Elgaaly, M., Hamilton, R. W., & Seshadri, A. (1996). Shear strength of beams with corrugated webs. Journal of Structural Engineering, 122(4), 390-398. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(390)
Hutton, D. V. (2004). Fundamentals of finite element analysis. McGraw-hill.
Johansson, B., Maquoi, R., Sedlacek, G., Müller, C., & Beg, D. (2007). Commentary and worked examples to EN 1993-1-5 Plated Structural Elements. JRC scientific and technical reports.
Khalid, Y. A., Chan, C. L., Sahari, B. B., & Hamouda, A. M. S. (2004). Bending behaviour of corrugated web beams. Journal of materials processing technology, 150(3), 242-254. DOI:10.1016/j.jmatprotec.2004.02.042
Korrani, H. R. K. N., & Molanaei, S. (2010). The effects of the corrugation profiles of the web on the lateral-torsional buckling strength of the inelastic I-girder. World Applied Sciences Journal, 8(5), 527-530.
Kudryavtsev, S. (2018, June). Influence of web openings on bearing capacity of triangularly corrugated web beam. In IOP Conference Series: Materials Science and Engineering (Vol. 365, No. 4, p. 042034). IOP Publishing. DOI:10.1088/1757-899X/365/4/042034
Li, X., Zhang, Z., & Li, G. (2019). Local bearing capacity of steel beams with corrugated webs. International Journal of Steel Structures, 19, 44-57.
Lin, X., Far, H., & Saleh, A. (2019). Structural behaviour and mechanical properties of welded steel I-girders with corrugated webs. International Journal of Steel Structures, 19, 1342-1352.
Manual, U. D. F. "ANSYS 18.0." Theory Guide (2017).
Morkhade, S. G., Baswaraj, S. M., & Nayak, C. B. (2019). Comparative study of effect of web openings on the strength capacities of steel beam with trapezoidally corrugated web. Asian Journal of Civil Engineering, 20(8), 1089-1099. https://doi.org/10.1007/s42107-019-00166-6
Riahi, F., Behravesh, A., Fard, M. Y., & Armaghani, A. (2018). Shear buckling analysis of steel flat and corrugated web I-girders. KSCE Journal of Civil Engineering, 22(12), 5058-5073.
Zhang, W., Li, Y., Zhou, Q., Qi, X., & Widera, G. E. O. (2000). Optimization of the structure of an H-beam with either a flat or a corrugated web: Part 3. Development and research on H-beams with wholly corrugated webs. Journal of Materials Processing Technology, 101(1-3), 119-123. DOI:10.1016/S0924-0136(00)00450-7
Zubkov, V., Lukin, A., & Alpatov, V. (2018). Experimental research of beams with corrugated web. In MATEC Web of Conferences (Vol. 196, p. 01005). EDP Sciences. https://doi.org/10.1051/matecconf/201819601005
Ahmed.S. Elamary , Yasir.M. Alharthi , Mostafa F. Hassanein , Ibrahim.A. Sharaky (2022). Trapezoidally corrugated web steel beams loaded over horizontal and inclined folds. El Sevier, journal of Construction Steel Research 192 (2022) 107202
Muslim A. Al-Kannoon1 and Ibtihal A. Suhiel (2020). Experimentally Flexural Behaviour Study of Steel Beams with Corrugated Webs. In IOP Conf. Series: Materials Science and Engineering 888 (2020) 012084
Ezzeldin Yazeed Sayed Ahmed (June 2007)- Design aspects of steel I-girders with corrugated steel webs. Article in Electronic Journal of Structure.